specifcations subject to change without notice. please check our website for latest information. high-reliability power inductors MS412PJB 3015 power inductors document ms436-1 revised 03/25/11 core material ferrite terminations tin-lead (63/37) over tin over nickel. weight 40 C 45 mg ambient temperature C55c to +105c with i rms current, +105c to +155c with derated current storage temperature component: C55c to +155c. packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) enhanced crush-resistant packaging 1000/7 reel plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth recommended pick and place nozzle od: 3 mm; id: 1.5 mm high temperature materials allow operation in ambient temperatures up to 155c special construction allows it to pass vibration testing to 80 g and shock testing to 1000 g. tin-lead (sn-pb) termination for the best possible board adhesion inductance 2 dcr max 3 srf (mhz) 4 isat (a) 5 irms (a) 6 part number 1 20% (h) (ohms) min typ 10% drop 20% drop 30% drop 20c rise 40c rise MS412PJB102msz 1.0 0.075 133 190 1.8 2.0 2.1 1.1 1.6 MS412PJB152msz 1.5 0.100 98.0 140 1.8 2.1 2.2 1.0 1.4 MS412PJB182msz 1.8 0.100 94.5 135 1.5 1.7 2.1 0.88 1.1 MS412PJB222msz 2.2 0.110 77.0 110 2.0 2.0 2.1 0.88 1.1 MS412PJB332msz 3.3 0.130 63.0 90 1.4 1.5 1.5 0.80 1.1 MS412PJB472msz 4.7 0.200 55.3 79 1.1 1.2 1.2 0.72 1.0 MS412PJB682msz 6.8 0.300 40.6 58 0.83 0.86 0.89 0.54 0.72 MS412PJB103msz 10 0.440 33.6 48 0.60 0.69 0.73 0.44 0.60 MS412PJB153msz 15 0.700 24.5 35 0.58 0.61 0.62 0.35 0.47 MS412PJB183msz 18 0.750 23.1 33 0.56 0.58 0.59 0.34 0.46 MS412PJB223msz 22 0.825 21.0 30 0.48 0.49 0.50 0.34 0.46 MS412PJB333msz 33 1.30 16.1 23 0.39 0.41 0.42 0.28 0.38 MS412PJB473msz 47 1.55 11.9 17 0.36 0.38 0.39 0.24 0.32 MS412PJB683msz 68 2.25 9.80 14 0.30 0.31 0.32 0.20 0.26 MS412PJB104msz 100 3.40 7.70 11 0.24 0.25 0.26 0.15 0.21 MS412PJB124msz 120 4.60 6.30 9.0 0.21 0.22 0.23 0.14 0.18 MS412PJB154msz 150 6.10 5.60 8.0 0.19 0.20 0.20 0.12 0.16 MS412PJB184msz 180 8.60 5.25 7.5 0.16 0.17 0.17 0.10 0.14 MS412PJB224msz 220 9.50 4.20 6.0 0.15 0.16 0.16 0.090 0.12 MS412PJB334msz 330 23.0 3.50 5.0 0.10 0.11 0.11 0.060 0.080 1. when ordering, please specify testing code: MS412PJB333msz testing: z = cots h = screening per coilcraft cp-sa-10001 n = screening per coilcraft cp-sa-10004 2. inductance tested at 100 khz, 0.1 vrms using an agilent/hp 4192a. inductance at 1 mhz is the same for parts with srf 10 mhz. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current that causes the specifed inductance drop from its value without current. 6. current that causes the specifed temperature rise from 25c ambient. 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. 1102 silv er lak e road car y il 60013 phone fa x 800-981-0363 847-639-1508 e-mail we b cps@coilcraft.com www .coilcraft-cps .com ? ? coilcraft, inc. 2011
specifcations subject to change without notice. please check our website for latest information. MS412PJB series (3015) 3015 power inductors document ms436-2 revised 03/25/11 typical l vs current 0.01 0.1 11 0 0.1 1 10 100 inductance (h) 0.01 0.1 11 0 current (a) 4.7 h 22 h 33 h 10 h 3.3 h 2.2 h 1.0 h typical l vs frequency 0.01 0.1 11 0 0.1 1 10 100 inductance (h) 0.01 0.1 11 0 frequency (mhz) 4.7 h 22 h 33 h 10 h 3.3 h 2.2 h 1.0 h current derating dimensions are in inches mm -40 -20 02 04 06 08 0 100 160 140 120 ambient temperature (c) pe r cent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 25c i sat i rm s ? height dimension is after mounting. fo r maximum height dimension bef ore mounting, add 0.006 in / 0,152 mm. ? 0.116 0.003 2,95 0,076 0.116 0.003 2,95 0,076 0.130 3,30 0.040 1,02 0.025 0,64 0.045 1,14 0.020 0,51 0.130 3,30 suggested land p attern 0.035 0,89 * * dimensions are of the case not including the ter mination. fo r maximum ov erall dimensions including the ter mination, add 0.005 i n/0,13 mm. * 0.0591 0.004 1,50 0,10 1102 silv er lak e road car y il 60013 phone fa x 800-981-0363 847-639-1508 e-mail we b cps@coilcraft.com www .coilcraft-cps .com ? ? coilcraft, inc. 2011
|
